Ultra BITUMEN emulsion 15kg Bucket

• As a general-purpose damp-proof coating for concrete
• waterproofing and protective coating for basements, foundations and retaining walls.
• vapour barrier for both above and below ground applications.
• maintenance coating for roofs and walls over concrete or metal surfaces
• bonding and priming coat for a variety of bitumen-based waterproofing systems, weather coat, felt or membranes.

• All surfaces to be coated should be sound and thoroughly clean before Ultra Coat is applied, remove all dust, dirt, rust, oil, grease and any loose particle, which may affect the adhesion of the coating with the substrate.
• The application can be done with roller, brush, airless spray. mix the content of the drum or pail thoroughly before applying.
• Apply Ultra Coat on the substrate at the thickness of 125microns. Further Coasts shall be applied only after the previous coat is completely cured.
• A prime coat is recommended before the application of the first coat is completely cured.
• The prime coat can be made by diluting the same Ultra Coat Bitumen Emulsion with 20% water.

UltraCoat Bitumen Emulsion gives a 4.6 square Meter per kg with dry lm thickness of 125 microns.

ULTRA COAT is water-based sulphate resistant bitumen emulsion coating of brushing consistency that dries to give the arm, flexible, jointless waterproof and protective membrane. It is formed by the anionic emulsification of pliable bitumen and is both stable and easy to apply.
Ultra bitumen acts as a general waterproof, damp-proof membrane and vapour seal for concrete, masonry, asbestos cement sheets, and roofing felts, wood. It also ensures the protection of steelwork, pipes and metal.

• Easy to apply
• Economical in use
• Cold Applied
• Excellent water and moisture proof properties
• Adhere to all types of surfaces
• Water Based
• Vapor permeable allows substrate to breath
• Non-slumping
• Resistant to UV rays: no erosion or cracking
• Contains no solvent, no health hazard
• Non-toxic when cured or membranes

• ULTRA COAT may be applied by brush, roller, on horizontal surfaces. Ensure the contents of the containers are well mixed before application.
• It is recommended that two or more coats must be applied to ensure a durable finish. The first coat is to be applied as a priming coat Allow 3 hours for drying, and then apply a second coat on the prepared surface.