Ultra Bond Gold EX 420

It is polymer modified cement based quick set tile adhesive specially designed for heavy duty applicants for fixing vitrified tiles, slabs, natural stones and large size tiles on interior and exterior wall and floor surfaces. it is highly suggested for exterior areas, because it resists thermal expansion.

 

• Temperature and chemical resistant very good adhesion
• Non toxic
• Water cleanup of un cured adhesive Very easy to apply
• Dual purpose for wall and oor High bond strength Economical

RECOMMENDED USE:

• Specially designed for interior & exterior Door & wall applications.(ceramic, sandstone, granite, marble, porcelain, etc.) on the following Substrates Concrete, Lightweight blocks, Stone walls (cleaned and prepared),Glazed tiles (internal use),Cementations plaster and renders, Gypsum Board.
• Ultra BOND EX 420 also uses in swimming pools, Bathrooms, Stairs, Heated oors, Rooms, Parking etc.

 

INSTRUCTION FOR USE:

• Add 5 litter clean water with 20kg of Ultra BOND Gold EX 420 and stir well until a lump free compound is achieved. The surface to be tiled should be clean and sound.
• Old surfaces must be free from any kind of grease oils wax etc. At site addition of water shall be adjusted to attain desired consistency and mix thoroughly until a homogeneous paste is obtained. Allow tiling to set for 24 hours prior to lling joints.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Apply Ultra BOND EX 420 on the substrate by areas of around 1 m2 each, which can be tiled within a maximum of 25 minutes from application time at 23°C.
• After that time, an outer skin may form thus preventing the tile from adhering properly to Ultra BOND EX 420.
• Adjustments to the tiles should only be made during Ultra BOND EX 420 open time. It is recommended to leave a minimum width of 2 mm around the tiles.
• Grouting the tile joints should only be done at least 24 hours after tiling, using Ultra Joint Filler EX-20.